Skip to content
Ejaculation.org

Health

Semen Analysis: What It Measures and Normal Values Explained

What a semen analysis measures, WHO normal values in plain English, how to prepare for the test, what abnormal results mean and how home sperm tests compare.

Short answer

A semen analysis is a lab test of a semen sample that measures volume, sperm count, movement (motility), shape (morphology) and more. Results are compared with WHO values from fertile men, such as 16 million sperm per mL and 1.4 mL of semen. A result below these values is not a diagnosis of infertility; a repeat test usually follows.

Updated · sources listed at the end of this page

By The Ejaculation.org Editorial TeamUpdated 8 min read

Key takeaways

  • A semen analysis measures semen volume, sperm concentration and total number, motility, morphology, vitality, pH and how quickly the sample liquefies.
  • In WHO data from more than 3,500 fertile men, the 5th-centile values were 16 million sperm per mL, 30% progressive motility, 42% total motility and 4% normal forms.
  • The 2021 WHO manual also lists 1.4 mL of semen and 39 million sperm per ejaculate as 5th-centile values; results below them prompt further evaluation but do not prove infertility.
  • Labs usually ask for 2 to 5 days without ejaculation before the test, and the sample should reach the lab within about 30 minutes at body temperature.
  • US urology guidance advises considering at least two semen analyses about a month apart, especially when the first one is abnormal.

A semen analysis is a laboratory test of a fresh semen sample that measures how much semen there is and the number, movement and shape of the sperm in it, along with properties such as acidity and how the sample liquefies (MedlinePlus). Results are compared with values from fertile men published by the World Health Organization (WHO): for example, 95% of fertile men had at least 16 million sperm per millilitre (Campbell et al., 2021).

It is one of the first tests when a couple has trouble conceiving: about half of couples who are unable to have children have a male fertility factor (MedlinePlus). It is also used to confirm that a vasectomy has worked, and sometimes to investigate changes in semen.

This page explains each value in plain English, how to prepare so your result is accurate, how to read an abnormal result, and how at-home tests compare. It is part of our guide to ejaculation and your health, within the wider section on how ejaculation works and its common problems.

What does a semen analysis measure?

A standard semen analysis measures the semen itself and the sperm in it. Cleveland Clinic lists sperm count, motility and morphology, plus pH, semen volume, concentration, time to liquefaction, vitality and the presence of white blood cells (Cleveland Clinic).

  • Volume: how much fluid you produce in one ejaculation, in millilitres (mL).
  • Sperm concentration: how many sperm there are in each millilitre, often called the sperm count.
  • Total sperm number: concentration multiplied by volume, the number of sperm in the whole sample.
  • Motility: the percentage of sperm that move. Progressive motility counts only those swimming forward.
  • Morphology: the percentage of sperm with a normal shape, judged by strict criteria under the microscope.
  • Vitality: the percentage of sperm that are alive, used mainly when motility is low.
  • pH and liquefaction: semen is slightly alkaline, and it thickens on ejaculation, then becomes liquid within about half an hour. Our guide to semen consistency explains why it can look watery, thick or clumpy from day to day.
  • White blood cells: a raised number can point to inflammation or infection.

What are normal semen analysis values?

The WHO values below are the 5th centile in fertile men: the level that 95% of men who had recently fathered a child reached or exceeded. They come from the 2021 WHO laboratory manual and the pooled data behind it.

MeasureWHO 5th-centile value (2021)What it means
Semen volume1.4 mL (Boitrelle et al., 2021)Less than this is low volume; see what normal semen looks like
Sperm concentration16 million per mL (Campbell et al., 2021)Below this is called oligozoospermia (low sperm count)
Total sperm number39 million per ejaculate (Boitrelle et al., 2021)Accounts for volume as well as concentration
Total motility42% (Campbell et al., 2021)Share of sperm moving at all
Progressive motility30% (Campbell et al., 2021)Share swimming forward; low values are called asthenozoospermia
Normal forms (morphology)4% (Campbell et al., 2021)Strict criteria: most sperm in fertile men look abnormal
Vitality54% live (Boitrelle et al., 2021)Checked when motility is low
pH7.2 to 8.0 (Cleveland Clinic)Unusual values are a reason for further checks
Liquefaction time15 to 30 minutes (Cleveland Clinic)Slow liquefaction is noted on the report

Two things often confuse people. First, your lab report may use different ranges: MedlinePlus, for example, still gives 1.5 to 5.0 mL and 20 to 150 million sperm per mL as normal (MedlinePlus), which reflects older WHO editions. Always read your result against the range printed on your own report. Second, the 4% figure for normal shape is not a typing error: under strict criteria, most sperm in fertile men have some irregularity.

Do normal values mean you are fertile?

No. The WHO authors stress that these values do not mark a clear line between fertile and subfertile men (Campbell et al., 2021). The 2021 manual moved away from reference thresholds towards "decision limits", although it does not yet propose any (Boitrelle et al., 2021).

The US guideline from the American Urological Association and the American Society for Reproductive Medicine makes the same point: semen values falling above or below the lower limit do not by themselves predict either fertility or infertility, and results should be considered together (AUA/ASRM). A value below the line does not mean you cannot father a child, and a normal result does not rule out other causes of difficulty conceiving, in either partner.

How do you prepare for a semen analysis?

Preparation matters, because the days since your last ejaculation and how the sample is handled change the result.

  1. Follow the abstinence window

    Avoid any sexual activity that leads to ejaculation for 2 to 3 days before the test, and no longer than 5 days, after which quality can decline (MedlinePlus). Some labs give a wider window of 2 to 7 days (Cleveland Clinic). Use your lab's instructions.

  2. Tell the lab about medicines and recent illness

    Mention any medicines, supplements and recent fever. Some medicines, such as alpha-blockers for an enlarged prostate, can reduce or stop the fluid that comes out (Li et al., 2025).

  3. Collect the whole sample

    The usual method is masturbation into a sterile container from the lab; some clinics provide a special collection condom for use during intercourse (MedlinePlus). Don't use ordinary lubricant or a regular condom unless the lab says so. Collect the whole sample, and tell the lab if any of it was lost.

  4. Keep it warm and deliver it fast

    If you collect at home, the sample should reach the lab within 30 minutes, kept at body temperature, for example in an inside coat pocket (MedlinePlus).

  5. Bring ID and plan a repeat

    Many clinics ask for photo ID (Cleveland Clinic). If you repeat the test, try to keep the same abstinence interval so the results can be compared.

Why the abstinence period matters

Pooling 85 studies, shorter abstinence was associated with lower semen volume (about 0.95 mL less in healthy men) and lower total sperm count (Du et al., 2024). Longer abstinence raises volume and count but not necessarily quality: in men with low sperm counts, the total count stopped rising after about the 4th to 5th day (Du et al., 2024). A sample taken after one day, or after two weeks, can give a misleading picture.

What do abnormal semen analysis results mean?

An abnormal result is a reason for further evaluation, not a diagnosis. Abnormal findings can point to male infertility problems, and many of the causes are treatable (MedlinePlus).

Report termMeaning
OligozoospermiaLow sperm concentration
AsthenozoospermiaLow sperm motility
TeratozoospermiaLow share of normally shaped sperm
AzoospermiaNo sperm found in the sample
Low volume or no ejaculateLittle or no fluid, for example from retrograde ejaculation, where semen flows back into the bladder (Mehta & Sigman, 2015)

The 2021 WHO manual has moved away from these labels because a single cut-off is not meaningful on its own (Boitrelle et al., 2021), but many labs still use them.

What usually happens next

  • A repeat test. Sperm counts vary from day to day (Cleveland Clinic). US guidance advises considering at least two semen analyses obtained a month apart, especially if the first is abnormal (AUA/ASRM).
  • A specialist assessment. When one or more semen values are abnormal, the guideline recommends a full history and physical examination by a male reproductive specialist (AUA/ASRM).
  • Hormone tests. Testosterone and FSH (follicle-stimulating hormone) are checked in men with a low sperm count or no sperm, low libido, erection problems, small testicles or other signs of a hormonal problem (AUA/ASRM).
  • A urine test after ejaculation if volume is very low, to look for sperm that went backwards into the bladder (Mehta & Sigman, 2015).

Age plays a part too. Pooling 90 studies of 93,839 men, semen volume, sperm motility and normal shape all declined with age, while concentration did not (Johnson et al., 2015).

Are at-home sperm tests accurate?

At-home tests can screen for some measures but cannot replace a lab analysis. Kits vary: some estimate only sperm concentration, others also estimate motility, so check exactly what a product measures. Cleveland Clinic notes that at-home sperm tests are not as thorough as a lab test, that few studies have assessed how well they work, and that relying on them can delay diagnosis and treatment (Cleveland Clinic).

At-home testLab semen analysis
MeasuresOften concentration only, sometimes motilityVolume, concentration, total count, motility, morphology, vitality, pH, liquefaction, white cells
Quality controlVaries by productStandardised methods in the WHO manual (Boitrelle et al., 2021)
Can diagnose a problemNoTogether with history and examination
Useful forA first, private checkFertility work-up, vasectomy confirmation

A reassuring home result does not rule out a problem. If you and your partner have been trying to conceive without success, book a proper analysis.

What is a post-vasectomy semen analysis?

After a vasectomy, a semen analysis confirms that sperm are no longer present. The expected result is no sperm or only very few non-moving sperm, typically from eight to twelve weeks after the procedure (Cleveland Clinic). Use other contraception until you have been told the result is clear. Our guide to what semen is made of explains where each part comes from.

Can ejaculation problems affect a semen analysis?

Yes. Little or no fluid at orgasm can come from retrograde ejaculation or anejaculation, and both have workarounds for collecting sperm (Mehta & Sigman, 2015). If your concern is how quickly you ejaculate rather than what is in the semen, that is a separate question: see the fertility section of our guide to ejaculation and your health and, for timing, our complete guide to premature ejaculation. For what normal semen looks like day to day, including volume, semen color and texture, see what normal semen looks like. Problems such as delayed, retrograde or painful ejaculation are covered in our guide to ejaculation disorders.

The bottom line

A semen analysis measures volume, sperm count, movement and shape and compares them with WHO values from fertile men, such as 16 million sperm per mL and 1.4 mL of semen. Those values are guides, not pass marks: one abnormal result usually leads to a repeat test about a month later and a specialist review. Prepare carefully, with 2 to 5 days of abstinence and fast, warm delivery, and use at-home kits only as a first check.

Frequently asked questions

What is a normal sperm count?

In WHO data from fertile men, 95% had at least 16 million sperm per mL and at least 39 million sperm in the whole ejaculate. Higher is not automatically better, and values below these levels do not mean you cannot father a child.

How many days should you abstain before a semen analysis?

Most labs ask for 2 to 5 days without ejaculation; MedlinePlus advises 2 to 3 days and no more than 5, while Cleveland Clinic gives 2 to 7. Follow your lab's instructions and keep the interval similar if you repeat the test.

Can one bad semen analysis mean I am infertile?

No. Sperm results vary from day to day, and US guidance suggests considering at least two analyses about a month apart, especially if the first is abnormal. Results are interpreted together with your history and examination.

Are at-home sperm tests accurate?

They can give a rough idea of sperm concentration or motility, but they are less thorough than a lab test and have limited evidence behind them. A normal home result does not rule out a problem, so see a doctor if you have been trying to conceive without success.

How long do semen analysis results take?

Usually a few days after you provide the sample, according to Cleveland Clinic. Your doctor will normally go through the report with you.

Sources

  1. Campbell MJ, Lotti F, Baldi E, Schlatt S, Festin MPR, Björndahl L, Toskin I, Barratt CLR (2021). Distribution of Semen Examination Results 2020: A Follow Up of Data Collated for the WHO Semen Analysis Manual 2010. Andrology. Summary · doi:10.1111/andr.12983
  2. Boitrelle F, Shah R, Saleh R, Henkel R, Kandil H, Chung E, Vogiatzi P, Zini A, Arafa M, Agarwal A (2021). The Sixth Edition of the WHO Manual for Human Semen Analysis: A Critical Review and SWOT Analysis. Life (Basel). Summary · doi:10.3390/life11121368
  3. Du C, Li Y, Yin C, Luo X, Pan X (2024). Association of Abstinence Time With Semen Quality and Fertility Outcomes: A Systematic Review and Dose-Response Meta-Analysis. Andrology. Summary · doi:10.1111/andr.13583
  4. Johnson SL, Dunleavy J, Gemmell NJ, Nakagawa S (2015). Consistent Age-Dependent Declines in Human Semen Quality: A Systematic Review and Meta-Analysis. Ageing Research Reviews. Summary · doi:10.1016/j.arr.2014.10.007
  5. Li J, Ai C, Yuan C, Wang K, Yu L, Jian Z, Luo Q, Ma X (2025). Silodosin in Treating Men With BPH-Associated Lower Urinary Tract Symptoms: A Systematic Review and Network Meta-Analysis. International Journal of Surgery. Summary · doi:10.1097/JS9.0000000000004023
  6. Mehta A, Sigman M (2015). Management of the Dry Ejaculate: A Systematic Review of Aspermia and Retrograde Ejaculation. Fertility and Sterility. Summary · doi:10.1016/j.fertnstert.2015.09.024
  7. MedlinePlus: Semen analysis
  8. Cleveland Clinic: Semen analysis
  9. AUA/ASRM Guideline: Diagnosis and treatment of infertility in men
  10. NHS: Ejaculation problems